VidoVPN Installation Note
==================

Preface
----------
VidoVPN is a vpn dialer application that will make VPN tunneling from Softphone client to Sip Server / SIP Proxy Server.
By Tunneling Minipax Softphone will increase the security because the SIP Message and RTP are encrypted thus work on countries where the voip port is blocked.

Note
------
VidoVPN application should be installed on the same folder as Minipax Softphone installation directory.
You should have a VPN server ready (PPTP) and configure vpnconfig.ini prior to using VidoVPN application

You must supply vpnserver ip address, vpn username and password in vpnconfig.ini
for example:

[main]
vpnname=vpn_minipax
vpnserver=125.203.65.22
vpnusername=test
vpnpassword=123
app=minipax.exe

[route]
1=202.155.24.33
2=202.155.24.34

You can add route to your sip server in route section. In above sample the sip server is 202.155.24.33 and 202.155.24.34, VidoVPN application will automaticaly route this ip address to VPN tunnel.

After vpnconfig.ini is set run the VidoVPN. If VPN authentication success Minipax Softphone will automatically launch and if Minipax Softphone closed VidoVPN will also automaticly disconnect.



Copyright 2007-2008, Vidosystem

For more information please contact support@vidosystem.com
website: http://www.vidosystem.com